Recurring Inspections - Beko BEKOKAT CC-1200 Installation And Operation Manual

Installation and Operation Manual BEKOKAT
Posit
Activity
ion
Perform a leakage test of valves V1 and V2.
10
If necessary, replace the valves.
Maintenance of safety valves X4.
Maintenance of the safety valve and its intervals must be
11
determined by the operator according to the conditions
of use.
Change the filter element on the afterfilter (option).
12
Replacement of the set of wearing parts of the
13
®
BEKOMAT 20 FM at the afterfilter (option).
Exchange of catalyst agent
14
NOTE Skilled technical personnel
The annual maintenance of the BEKOKAT
BEKO TECHNOLOGIES or by authorised skilled technical personnel
allocated by the manufacturer.
7.4

Recurring inspections

The owner and/or operator is obliged to specify deadlines for the recurring inspections and,
depending on the classification in the compressed air equipment category in accordance with
the Pressure Equipment Directive, have these executed by an approved inspection body.
82 / 88
®
Weekly
® can only be performed by
Monthl Annuall
y y
x
x
x
x
Refer to Chapter 7.5
V01 / 11-043