Mitsubishi Electric MELSEC iQ-R Series Introduction Manual page 40

Event history setting
Operating procedure
1.
To save device/label operations in the event history, set the following item to "Save".
[Navigation] window  [Parameter]  CPU module to be used  [CPU Parameter]  [RAS Setting]  [Event History
Setting]
For details on the event history setting, refer to the following.
Page 79 Event History Function (Saving Device/Label Operations)
External device configuration
Configure the settings of the network camera to be connected to the programmable controller.
Operating procedure
1.
Display the Ethernet configuration window.
[Navigation] window  [Parameter]  [RCPU]  [Module Parameter]  [Basic Settings]  [External Device
Configuration]
2.
Select "Active Connection Module" in the module list, and drag and drop it to "List of devices" or "Device map area".
3.
Set "Communication Method" of the set "Active Connection Module", "Port No." of "PLC", "IP Address" and "Port No." of
"Sensor/Device", and "Existence Confirmation".
4 CAMERA RECORDING FUNCTION
39
4.2 Programmable Controller Setting
After the setting,
click here.