Mitsubishi Electric MELSEC iQ-R Series Introduction Manual page 46

■M+CameraRecord_AXIS_SetTime_R
The clock data of the CPU module is synchronized with the network camera five seconds after the program is run.
(2)
(3)
(4)
(5)
No. Description
(1) For the virtual input port No., specify the port No. set in the event window of the network camera.
Page 32 Rule settings
(2) Set the device to execute the FB.
If the FB is executed before the network camera starts up, it may not be function as expected. Create processing in which the FB is executed after the
network camera starts up.
In the sample program, the FB is executed approximately five seconds after the program is run.
(3) Specify the connection No. of the network camera.
Page 39 External device configuration
(4) Set the user name of the network camera set in the following.
Page 25 Initial start-up setting
(5) Set the password of the network camera set in the following.
Page 25 Initial start-up setting
4 CAMERA RECORDING FUNCTION
45
4.2 Programmable Controller Setting
(1)