Table of Contents
Advertisement
9.4. Media Eject Prevention (PRV/ALW)
This Head setting enables or disables the eject function.
Header
O
Allow the Tray eject.
Prevent the Tray eject.
S
Eject button is ignored.
O: Open
S: Short
9.5. Audio Playback (TEST)
This Header setting selects the drive operation between normal CD-ROM and CD-Audio player
mode. When "S" is selected, command from the host computer is ignored.
Also CD-Audio disc or audio tracks in CD-ROM disc is playable by the command when the
Header is set for "0".
Header
O
Normal operation mode to connect the host computer.
(ID 1, ID 2, ID 4 and PRTY Headers should be set for O)
CD-Audio disc playback mode. Allows repeated play from beginning of the program
area up to the last when the disc is loaded. Pushing the Eject Button for shorter than
S
1 s allows proceeding to beginning of the next track number but not acceptable during
access.
Pushing the button more than 2 s stops playing and ejects the Tray.
O: Open
S: Short
9.6. Power Supply (POWER SUPPLY)
This header setting switches to supply the power (+5 V) to the other equipments through
the SCSI connector or not.
Header
O
No power is supplied from the drive.
S
Power is supplied to the other peripherals through SCSI Connector (Pin No. 26).
O: Open
S: Short
9.7. Jumper (Part Number T/E)
Use P/N 9251H-GF made by IRISO Electronics or equivalent.
9.8. Recognition of Setting
As the setting recognition is performed only after power On, turn power off and then
On again whenever change is made.
Description
Description
Description
22/27
XM-6401B Rev.1.0
Advertisement
Table of Contents
