LG WM4500H A Series Owner's Manual page 30

30 OPERATION
• Steam may not be clearly visible during steam
cycles. This is normal. Too much steam could
damage clothing.
• Do not use steam with delicate fabrics such as
wool and silk, or easily discolored fabrics.
WARNING
• Do not touch the door during steam cycles. The
door surface can become very hot and can cause
severe burns. Allow the door lock to release
before opening the door.
• Do not attempt to override the door lock
mechanism or reach into the washer during a
steam cycle. Steam can cause severe burns.
Fresh Care
Use this function when you will not be able to
unload your clothes immediately after the wash
cycle ends.
• The drum will tumble periodically for up to 19
hours to prevent wrinkles.
1
Turn on the power.
2
Select the desired cycle.
3
Press and hold the Steam button for 3
seconds to select this function.
4
Press the Start/Pause or Power button at any
time to unload laundry.
Using the Pre-wash Option
This option adds a pre-wash (for about 15 - 17
minutes) for improved cleaning of heavily soiled
or stained clothing.
NOTE
• If you select Pre-wash after putting the
detergent directly in the drum, the detergent
may be washed away, reducing the washing
performance. For best results, use Pre-wash
with the ezDispense function.
• The manual dispenser cannot be used for pre-
wash detergent dispensing.
Remote Start
Use a smartphone to control your washer
remotely.
• For more information, see SMART FUNCTIONS
in this manual.
Delay Wash
Once you have selected the cycle and other
settings, press the Delay Wash button to delay the
start of the wash cycle.
• Each press of this button increases the delay
time by 1 hour, for up to 19 hours.
• Once the desired delay time is set, press the
Start/Pause button to start the delay time.
NOTE
• If the Start/Pause button is not pressed to begin
the delay time, the washer automatically turns
off after a certain time and all cycle settings are
lost.
Wi-Fi
When the washer is connected to a home Wi-Fi
network, the icon on the control panel is lit.
f
• To connect the washer to the LG ThinQ
application, press and hold the Delay Wash
button for 3 seconds.
Add Item
Use this function to add garments or remove
foreign objects like coins or keys after the cycle has
started.
1
Press the Cold Wash button for 3 seconds
while the wash cycle is running.
• The cycle pauses and the door unlocks.
2
Open the door, add garments or remove
foreign objects, and close the door.
3
Press the Start/Pause button to resume the
cycle. The cycle continues automatically.
WARNING
• Do not attempt to force the door to open when
locked. Doing so could result in damage to the
appliance, malfunction, or personal injury.