Page 1
SPLIT TYPE AIR CONDITIONER INDOOR UNIT/OUTDOOR UNIT MODEL RAS-DX10CWK/RAC-DX10CWK RAS-DX13CWK/RAC-DX13CWK RAS-DX18CWK/RAC-DX18CWK RAS-DX10CWK RAS-DX13CWK RAS-DX18CWK RAC-DX10CWK RAC-DX13CWK RAC-DX18CWK F.Wash Right/Left Sleep Silent Instruction manual Page 1~22 To obtain the best performance and ensure years of trouble free use, please read this instruction manual completely.
Page 3
SAFETY PRECAUTION Please read the “Safety Precaution” carefully before operating This appliance is filled with R32. the unit to ensure correct usage of the unit. Please read the “Safety Precaution” carefully before operating the unit to ensure correct usage of the unit. Pay special attention to signs of “...
Page 4
PRECAUTIONS DURING OPERATION The product shall be operated under the manufacturer specification and not for any other intended use. Do not attempt to operate the unit with wet hands, this could cause fatal accident. When operating the unit with burning equipments, regularly ventilate the room to avoid oxygen insufficiency.
HORIZONTAL DEFLECTOR • VERTICAL DEFLECTOR (AIR OUTLET) (Refer page 14) REMOTE CONTROL Send out operation signal to the indoor unit. So as to operate the whole unit. F.Wash Right/Left (Refer page 7) Sleep Silent OUTDOOR UNIT RAS-DX10CWK/RAS-DX13CWK/RAS-DX18CWK RAC-DX10CWK/RAC-DX13CWK/RAC-DX18CWK - 5 -...
ATTACHING AND REMOVING FRONT PANEL While gripping both the left and right hand edges [recessed in the front housing] of the front panel, lift up to open the front panel. After completion of job, slightly lift up the front panel and pull down to close the front panel. Ensure that the 3 sets of left, centre and right clips are fully secured.
NAMES AND FUNCTIONS OF REMOTE CONTROL This controls the operation function and timer setting of the room air conditioner. The range of control is about 7 meters. lf indoor lighting is controlled electronically, the range of control may be shorter. Signal Transmission Transmission Sign MODE selector Button...
DEHUMIDIFYING OPERATION Use the device for dehumidifying when the room temperature is over 16°C. When it is under 15°C, the dehumidifying function will not work. Press the MODE selector button so that the display indicates (DEHUMIDIFY). The fan speed is set at LOW. Press (FAN SPEED) button to select SILENT or LOW fan speed.
COOLING OPERATION Use the device for cooling when the outdoor temperature is to 4 °C. If humidity is very high (over 80%) indoors, some dew may form on the air outlet grille of the indoor unit. Press the MODE selector button so that the display indicates (COOL).
FAN OPERATION User can use the device simply as an air circulator. Press the MODE selector button so that the display indicates (FAN). Press the (FAN SPEED) button. (HIGH) (MED) (LOW) (SILENT) Right/Left F.Wash Sleep Silent START Press the (ON/OFF) button. Fan operation starts with a beep. STOP Press the button again to stop operation.
POWERFUL OPERATION By pressing (POWERFUL) button during DEHUMIDIFYING, COOLING, FAN operation, • the air conditioner performs at maximum power. • During POWERFUL operation, cooler air will be blown out from indoor unit for COOLING operation respectively. Press the (POWERFUL) button during operation. •...
Page 12
FROST WASH OPERATION The dust and dirt adhering to indoor heat exchanger which is the cause of the smell. They are washed away by freezing and thawing of the heat exchanger. Frost Wash function can work when the outdoor temperature is 1℃ to 43℃ and indoor humidity is 30% to 70%. The process of Frost Wash Frost Wash end Frost Wash start...
ECO OPERATION Energy saving operation by changing set temperature and by limiting the maximum power consumption value. By pressing the (ECO) button during Automatic, Dehumidifying or Cooling operation, the air conditioner performs the “ECO” operation. Press (ECO) button during operation. •...
Page 14
AUTO SWING OPERATION HORIZONTAL SWING ■ To start Horizontal Auto Swing Press (UP/Down (HORIZONTAL)) button. The defl ector(s) will ● start to swing up and down. is displayed on the LCD. F.Wash Right/Left ■ To cancel Horizontal Auto Swing Sleep Silent Press (UP/Down (HORIZONTAL)) button again.
Sleep SLEEP TIMER OPERATION The timer can be set up to a duration of 7 hours. Sleep By pressing (SLEEP) button during AUTO, DEHUMIDIFYING, COOLING or FAN operation, the unit shifts the room temperature and reduces the fan speed. It results in energy saving. Set the current time fi...
SILENT OPERATION Silent By pressing (SILENT) button during DEHUMIDIFYING, COOLING or FAN operation, ● the fan speed will change to ultra slow. ■ To start SILENT operation Silent Press (SILENT) button during operation. ● “ ” is displayed on the LCD. Fan speed will be ultra slow. ■...
Page 17
THE IDEAL WAYS OF OPERATION Suitable Room Temperature Install curtain or blinds I t i s p o s s i b l e Warning to reduce heat Freezing temperature entering the room is bad for health and a through windows. waste of electric power.
Page 18
FOR USER ’ S INFORMATION The Air Conditioner And The Heat Source In The Room Caution If the amount of heat in the room is above the cooling capability of the air conditioner (for example: more people entering the room, using heating equipments and etc.), the preset room temperature cannot be achieved.
Page 19
MAINTENANCE OF THE UNITS CAUTION Ensure that the unit is not in operation and all power supply has been disconnected before cleaning the unit. Dust Filter Screen Dust filter screens are installed to remove the indoor dust particles hence they should be kept clean at all times. They should be cleaned at each machine operation cycle of approximately 100 hours.
CLEANING THE FRONT PANEL Front panel can easily get dirty. Use a soft cloth to wipe it. If the front panel is excessively dirty, wipe the front panel with a soft cloth either wet with warm water or containing a mild detergent after which, wipe dry the front panel with a soft dry cloth.
Page 21
AFTER SALE SERVICE AND WARRANTY WHEN ASKING FOR SERVICE, CHECK THE FOLLOWING POINTS. CONDITION CHECK THE FOLLOWING POINTS • Is the fuse all right? • When it does not operate Is the voltage extremely high or low? • Is the circuit breaker “ ON ” ? •...
Page 22
Please note: On switching on the equipment, particularly when the room light is dimmed, a slight brightness fluctuation may occur. This is of no consequence. The conditions of the local Power Supply Companies are to be observed. Note • The recommended maximum and minimum operating temperatures of the hot and cold sides should be as below: Minimum Maximum...