Table of Contents
Advertisement
Chapter 2 Preparations
Fix a cage nut from inside of the rack. Hook either of the clips of the cage nut to a square hole of the rack,
and hook the other clip to a hole by a flat-bladed screwdriver.
4. Remove two CPU/IO modules from the chassis.
5. Loosen the screw, and remove the DVD drive unit from the chassis.
46
Note
Make sure that the cage nuts on left and right sides are level.
Inside of the rack
Remove the module while lowering the lock lever.
Tips
Express5800/R310g-E4, R320g-E4, R320g-M4 User's Guide
Outside of the rack
2. Installation and Connection
Advertisement
Table of Contents
