NEC Express5800/R310g-E4 User Manual page 65

Chapter 3 Setup
4. Open the acrylic cover, and press the POWER switch.
The System POWER LED goes on green, the server starts.
When the server starts, the server runs a power-on self test (POST) to check hardware. For details, see
Chapter 3 (1.1 POST).
After a while, the logo will appear on the screen.
Acrylic cover

Do not connect or disconnect USB device while POST is running.
Important

Do not power off the server while POST is running.
Express5800/R310g-E4, R320g-E4, R320g-M4 User's Guide
System POWER LED
POWER switch
1. Turning on the Server
65