NEC Express5800/R310g-E4 User Manual page 47

Chapter 2 Preparations
2. Installation and Connection
6. Loosen the screws, and remove the system backplane from the chassis.
System backplane
Screws
7. Insert the chassis from the front side of the rack.
8. Temporarily tighten flat head screws attached to the server to the four places at the top and the bottom
on front, and back sides (total: 8) from the rear of the rack.
Flat head screws
Flat head screws
Express5800/R310g-E4, R320g-E4, R320g-M4 User's Guide
47