Mitsubishi Electric Melsensor CF37-SR Settings Manual page 98

Table of Contents

The following shows the output image with or without setting <Use Read Setup>.

<Full string>:

<Full string><SP><Used Read Setup>:

Adding code quality results (grades)

It is assumed that the setting for executing Code Quality has already been set.

When other settings are required, add the settings to "Universal" as this setting is added to "Universal" of [Format Data].

 Select [Code Quality] from the [Settings] tab, and select the [Result String] tab.

 Select the checkbox of "Append Code Quality Data to Result String." By doing so, data is output by adding the data of each

quality item to a reading result. The display example is shown below.

The checkbox of "Output Overall Grade" can also be selected when adding the whole grades. ("Output Overall Grade" cannot

be executed without outputting data of each quality item.)

Without selecting the "Output Overall Grade" checkbox

With selecting the "Output Overall Grade" checkbox

Overall Grade

APPX

Appendix 8 Customizing Output Data

Table of Contents

Melsensor cf37-lr Melsensor cf26-sr Melsensor cf26-lr