Table of Contents
Advertisement
Quick Links
Interface Board for DisplayPort 2 input
Thank you for purchasing this Panasonic product.
■ Before using this product, please read these "Operating Instructions" and
the "Operating Instructions" of the projector carefully and save the manuals
for future use.
■ Before using this product, be sure to read "Read this fi rst!" ( x page 3).
Printed in China
Operating Instructions
ET-MDNDP10C
Model No.
Commercial Use
ENGLISH
DPQX1381ZA/X1
Advertisement
Table of Contents
Related Manuals for Panasonic ET-MDNDP10C
Summary of Contents for Panasonic ET-MDNDP10C
- Page 1 Interface Board for DisplayPort 2 input Commercial Use ET-MDNDP10C Model No. Thank you for purchasing this Panasonic product. ■ Before using this product, please read these “Operating Instructions” and the “Operating Instructions” of the projector carefully and save the manuals for future use.
-
Page 2: Table Of Contents
Contents Contents Read this first! Precautions for use Supported projector About the handling of the product Disposal Accessories Part names and functions Installing the Interface Board Before installing or removing the Interface Board How to install the Interface Board How to remove the Interface Board Specifications r Trademarks f DisplayPort™... -
Page 3: Read This First
Read this first! Read this first! WARNING: Do not spill water on this product or allow this product to get wet. Doing so may cause fire, electric shock, or malfunction due to short circuit or overheating. f Do not place a container with liquid close to this product. f Consult your dealer when liquid such as water is spilled on this product. - Page 4 Read this first! Name and quantity of hazardous substances contained in the product Hazardous substances Parts Cr VI PBB PBDE Printed circuit boards (PCB) Accessories This table is prepared in accordance with the provisions of SJ/T 11364. : The amount of hazardous substances included in all homogeneous materials for the relevant part does not exceed the limit specified in GB/T 26572.
-
Page 5: Precautions For Use
Note f Products other than the above may also be supported. Refer to the operating instructions for your projector or the Panasonic website (http://prosystem.panasonic.cn/projector/download. html). f If the main version of the firmware of the PT-SRQ22KC is less than 3.00, this interface board cannot be used. -
Page 6: Accessories
Precautions for use Accessories Make sure that the following accessories are provided with your product. Numbers enclosed in < > show the number of accessories. Screw <4> (XSB3+8FN) Attention f Appropriately discard the packaging material after unpacking the product. f For missing accessories, consult your dealer. f Store small parts in an appropriate manner, and keep them away from small children. -
Page 7: Installing The Interface Board
Installing the Interface Board Installing the Interface Board It is recommended to ask a qualified technician to install or remove the Interface Board to a projector. A malfunction may occur due to static electricity. Consult your dealer. Before installing or removing the Interface Board f Always turn off the power of the projector before installing or removing the Interface Board. -
Page 8: How To Install The Interface Board
Installing the Interface Board How to install the Interface Board Screws (4 locations) Salient Screws (4 locations) Slot cover Guide groove Fig. 1 Fig. 2 Fig. 3 Remove the slot cover. (Fig. 1) f Remove the four screws fixing the slot cover of the projector by rotating counterclockwise with a Phillips screwdriver. -
Page 9: How To Remove The Interface Board
Installing the Interface Board How to remove the Interface Board Handle Fig. 1 Remove the Interface Board. (Fig. 1) f Remove the four screws fixing the Interface Board by rotating counterclockwise with a Phillips screwdriver. The removed screws are used to fix the slot cover. f Hold the handle of the Interface Board and remove it slowly. -
Page 10: Specifications
380 ] (13.4 ozs.) Note f “SLOT NX” is a name of the slot unique to Panasonic supporting the signal input for the 4K image. f The video signal that can actually display will vary depending on the projector that the Interface Board is installed. - Page 11 MEMO MEMO ENGLISH - 11...
- Page 12 On the premise of complying with the safety requirements and precautions related to the product, it will not cause environmental pollution, or affect the health and property of the people in this period from the date of production. 日本大阪府门真市大字门真1006番地 http://panasonic.net http://panasonic.cn/ TI0419AM0 -PS © 松下电器产业株式会社2019版权所有。 Printed in China...