Page 1
ET-MDN12G10 Model No. ENGLISH FRANÇAIS Thank you for purchasing this Panasonic product. ■ Before using this product, please read these “Operating Instructions” and the “Operating Instructions” of the projector carefully and save the manuals for future use. ■ Before using this product, be sure to read “Read this fi rst!” ( x page 3).
Contents Contents Read this first! Precautions for use Supported projector About the handling of the product Disposal Accessories Part names and functions Installing the Interface Board Before installing or removing the Interface Board How to install the Interface Board How to remove the Interface Board Specifications 2 - ENGLISH...
Read this first! Read this first! WARNING: Do not spill water on this product or allow this product to get wet. Doing so may cause fire, electric shock, or malfunction due to short circuit or overheating. f Do not place a container with liquid close to this product. f Consult your dealer when liquid such as water is spilled on this product.
Precautions for use Precautions for use This product is a 12G-SDI signal compatible interface board for use installed in a Panasonic Connect Co., Ltd. projector. Supported projector PT-RQ32K series, PT-RQ13K series, PT-RQ22K series (As of March 2019) Note f Products other than the above may also be supported. Check the Operating Instructions of your projector.
Installing the Interface Board Note f The supplied screws are spare. Use them when a screw to fix the slot cover of the projector is lost. f The model numbers of accessories are subject to change without prior notice. Part names and functions <SDI 1 IN>...
Installing the Interface Board f Do not touch the connector section of the Interface Board directly with your hands. g The component may be damaged by the static electricity. f Remove the static charge from your body by touching the surrounding metal, etc., in advance to prevent the static electricity damage.
Installing the Interface Board Install the Interface Board to the projector. (Fig. 2) f Insert the guide groove of the Interface Board aligned to the salient of the slot. Insert the bracket firmly all the way in. Fix the Interface Board. (Fig. 3) f Tighten and fix with the four screws removed in Step 1).
Specifications Specifications Compatible slot SLOT NX specification BNC 4 lines (<SDI 1 IN> terminal, <SDI 2 IN/1 OUT> terminal, <SDI 3 IN> terminal, <SDI 4 IN/3 OUT> terminal) Single link SD-SDI signal, SMPTE ST 259 standard compliant Single link HD-SDI signal, SMPTE ST 292 standard compliant Single link 3G-SDI signal, SMPTE ST 424 and 425-2 standards compliant Single link 6G-SDI signal, SMPTE ST 2081-1 and 2081-10...
Page 9
Specifications Note f “SLOT NX” is a name of the slot unique to Panasonic Connect Co., Ltd. supporting the signal input for the 4K image. f The video signal that can actually display will vary depending on the projector that the Interface Board is installed.
Page 10
Panasonic Testing Centre Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany Winsbergring 15, 22525 Amburgo, Germania Importer for UK; Panasonic Connect UK, a branch of Panasonic Connect Europe GmbH, Maxis 2, Western Road, Bracknell, Berkshire, RG12 1RT Български Français Производител: Fabriqué...
Page 11
Eesti Lietuvių Tootja: Gamintojas: Panasonic Connect Co., Ltd. Panasonic Connect Co., Ltd. 4-1-62 Minoshima, Hakata-ku, Fukuoka 812-8531, 4-1-62 Minoshima, Hakata-ku, Fukuoka 812-8531, Jaapan Japonija Maaletooja: Importuotojas: Panasonic Connect Europe GmbH Panasonic Connect Europe GmbH Volitatud esindaja ELis: Įgaliotasis atstovas ES:...
Page 12
Polski Slovenščina Wyprodukowano przez: Proizvaja: Panasonic Connect Co., Ltd. Panasonic Connect Co., Ltd. 4-1-62 Minoshima, Hakata-ku, Fukuoka 812-8531, 4-1-62 Minoshima, Hakata-ku, Fukuoka 812-8531, Japonia Japonska Importer: Uvoznik: Panasonic Connect Europe GmbH Panasonic Connect Europe GmbH Upoważniony przedstawiciel w UE: Pooblaščeni zastopnik v EU:...