Installing The Modules On The Srs Mounting System - Sharp SRS Mounting System Installation Manual

6
IN S TAL L AT IO N WO Rk

6.11 INSTALLINg THE MOduLES ON THE SRS MOuNTINg SySTEM

1. Stand at the ridge side of the
roof and face the eave. Place
the solar module on the rail
so that it fits between the
high points of the rail.
2. Lift the solar module at side
facing the ridge of the roof.
The solar module will slide
forward slightly and will
engage the locking clip (as
shown).
3. Push the solar module
forward and rotate down to
fully engage the locking clip
(as shown).
4. Install all of the solar modules
in the row using the same
procedure.
 4