List Of Default-Setting Options - Epson Stylus Color 1520 User Manual

Setting
Print direction
Font
Pitch
I/F (interface) mode
Auto I/F (interface) wait time

List of Default-Setting Options

The table below lists all the options available for each default
setting. The factory defaults are listed in bold type in the table
below. The printer's current settings are marked with a
your printed instruction sheet.
Options
Auto, Bi-D, Uni-D
Courier, Roman,
Sans Serif, Script
Prestige, Roman T,
Sans Serif H, Draft
10, 12, 15, 17.1, or
20 cpi, or
Proportional
Auto, Parallel,
Serial, Option
10 or 30 seconds
5-5
Using Your Printer with DOS
Description
Auto switches between bidirectional
printing for text data (the print head prints
in both directions) and unidirectional
printing for graphics data. For the fastest
printing of text only, select Bi-D; but if
vertical lines become misaligned, you'll
need to turn it off or align the print heads
(see page 5-7 for instructions). For the
most accurate alignment when printing
graphics, select Uni-D.
If your software doesn't let you select
fonts, you can select one of these bitmap
or scalable fonts. See Appendix C for a list
of the point size and characters per inch
available with each font.
If your software doesn't let you select
point size or characters per inch for your
fonts, you can select one of these. See
Appendix C for a list of the point size and
characters per inch available with each
font.
When your printer is connected to multiple
interfaces, Auto sets the printer to receive
data from any interface sending a print job.
Select Parallel, Serial, or Option only if you
want your printer to ignore print jobs sent
from other interface types.
If you choose Auto for the I/F mode
setting, selects the time the printer waits
for a print job from one interface before
accepting a print job from another
interface.
on