Introduction; Pc System Requirements; Macintosh System Requirements - Epson Stylus Color 1520 User Manual

Introduction

PC System Requirements

To use your printer and its software with a PC, your system
should have:
®
An IBM compatible PC with at least a 386/25 MHz or
faster processor (486/25 MHz or faster for Windows NT)
DOS, Windows 95, Windows 3.1x, Windows for
Workgroups 3.11, Windows NT
NT 3.51
At least 16MB of RAM
At least 20MB of free hard disk space for storing images
(50MB or more is recommended)
VGA, Super VGA, or better display adapter and monitor
Double-speed CD-ROM drive (quad-speed or faster
recommended) for installing the printer software from the
CD-ROM
A shielded, twisted-pair parallel cable (6 to 10 feet long) to
connect your computer to the printer; the cable must have
a D-SUB, 25-pin, male connector for your computer and a
36-pin, Centronics
For PC network interface options and the additional system
requirements they may have, see Appendix A.

Macintosh System Requirements

To use your printer and its software with a Macintosh, your
system should have:
Any Macintosh or Power Macintosh model except the
Macintosh +, Macintosh 512, or PowerBook
System 7.1 or later
At least 8MB of built-in RAM (16MB or more is
recommended)
2
™
4.0, or Windows
®
compatible connector for the printer.
™
100