Using The Control Panel - Epson Stylus Color 1520 User Manual

Caution:
Load paper that's at least
8.3 inches (210 mm) wide
so ink doesn't spray onto
the platen.

Using the Control Panel

1. Turn on the printer and load paper in the built-in sheet
feeder, making sure the right edge guide is positioned
correctly for your paper's width and the paper release lever
is in the single sheet position. See page 3-6 for instructions.
2. Turn off your printer.
3. Hold down the
turn on print head alignment mode.
The printer loads a sheet of paper and prints an instruction
sheet telling you how to select a language (the default
setting is English). The printer can then print instructions
on aligning the print heads in the language you choose.
4. Press the button until the
Alt
lights on your control panel indicate the language you want
to use.
English Both lights off
French
Ink Out
Spanish Both lights on
Portuguese
Ink Out
German
Ink Out
Italian
Ink Out
5. Press the
Pause
aligning the print heads using the control panel.
6. Follow the instructions on the sheet. When the print heads
are aligned, turn off the printer to exit print head alignment
mode.
7. After five seconds, turn on the printer to resume printing.
6-9
Maintenance and Transportation
button and turn on the printer to
Pause
Ink Out
B on and
Ink Out
B flashing and
B flashing and
B off and
Ink Out
button. The printer prints instructions on
B and
Ink Out
A
A off
A on
Ink Out
A off
Ink Out
A on