note
Captions are not visible
when you display the
projector menus or use EMP
Monitor to access the
projector over a network.
Fine-tuning the Projector
62
Selecting Projector Setup Options
Use the Extended menu to customize the way you set up the
projector. You can configure the projector for rear and/or
ceiling/wall-mounted projection, change the language for the menus
and messages, set the screen background color, capture and store a
custom image or logo for the startup screen.
1. Press the
button.
Menu
2. Select the
Extended
3. Press
. Then use the up and down arrow buttons and the
Enter
button to set the following options:
Enter
■
Display
Lets you turn screen messages on or off.
Messages:
Display Background:
, or
Blue
Logo
Startup Screen:
screen when the projector is turned on.
Sets the screen background to
A/V Mute:
when the
Logo
Closed Caption
CC2.
menu.
Sets the screen background to
when no image signal is available.
Enables or disables display of the startup
button is pressed.
A/V Mute
: Turns on closed captioning using CC1 or
,
Black
,
, or
Black
Blue