Disabling The Projector's Buttons; Installing Security Locks - Epson PowerLite 410W User Manual

Disabling the Projector's Buttons

You can use the Control Panel Lock function to disable all the
projector's buttons, or all the buttons except for the P
1. Press the button.
Menu
2. Select the
Settings
3. Use the up and down arrow buttons to select
and press the
Enter
4. Select to disable all the buttons, or
Full Lock
disable all except the P
5. Select and press
Yes
6. Press the button.
Menu

Installing Security Locks

You can install two different types of security locks on the projector:
You can use the security slot on the base of the projector to install
■
a Kensington Microsaver Security System. See page 13.
You can use a wire lock to secure the projector to a room fixture
■
or heavy furniture, as shown below.
menu and press .
Enter
button.
button. Then press
Power
to confirm the setting.
Enter
button.
Power
Control Panel Lock
to
Partial Lock
.
Enter
Fine-tuning the Projector
note
To cancel Control Panel
Lock, press the projector's
button for 7 seconds.
Enter
71