Solving Network Problems
You don't see your projector in the EMP Monitor window.
■
Make sure that you've connected the projector to the network and
configured it correctly; see page 95. Also, make sure you've
registered the projector with EMP Monitor; see page 99.
Make sure that Standby Mode in the projector's Extended menu
■
is set to
Network On
If the computer you are using is running Windows XP or 2000,
■
®
or Windows Vista,
■
Try restarting your computer.
You don't receive an e-mail over the network when a
projector problem occurs.
Make sure that Standby Mode in the projector's Extended menu
■
is set to
Network On
Make sure that you've connected the projector to the network and
■
configured it correctly; see page 95.
Make sure you set up projector e-mail alerts correctly in the
■
Network menu (see page 97) or in EMP Monitor (see page 100).
Where To Get Help
Epson provides these technical support services:
Internet Support
Visit Epson's support website (U.S. or Canada) for solutions to
common problems with the PowerLite 410W. You can download
utilities and documentation, get FAQs and troubleshooting advice, or
e-mail Epson with your questions.
; see page 62.
you must be logged in as the Administrator.
; see page 62.
Solving Problems
91