Epson PowerLite 410W User Manual page 65

■
Lamp Hours
Displays the number of hours the lamp has been used. The
life span of the lamp ranges from about 3000 hours in
brightness mode to about 4000 hours in
mode. If the number shown is close to 3000 or the
information is displayed in red, make sure you have a spare
lamp handy.
■
Source
Displays the input source currently being projected.
■
Input Signal
Displays the input signal setting.
(computer, RGB video, and component video)
■
Resolution
Displays the input resolution.
■
Video Signal
Displays the video signal format.
■
Refresh Rate
Displays the refresh rate.
■ (computer, RGB video, and component video)
Sync Info
Provides information that may be needed by the service
technician.
■ Status
Displays informations about projector problems. This
information may be needed if service is required.
3. When you're finished, press
(computer, RGB video, and component video)
(composite and S-Video)
(computer, RGB video, and component video)
or
Esc Menu
High
brightness
Low
.
note
The lamp usage timer
doesn't register until you've
used the lamp for at least
10 hours.
Fine-tuning the Projector
65