Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Network Hardware
  5. eAN3810A
  6. Deployment manual

Huawei AirNode eAN3810A Deployment Manual

Hide thumbs Also See for AirNode eAN3810A:

Advertisement

Quick Links

Download this manual
eAN3810A
V100R001C00
Deployment Guide
Issue
01
Date
2017-04-30
HUAWEI TECHNOLOGIES CO., LTD.

Advertisement

loading

Related Manuals for Huawei AirNode eAN3810A

Summary of Contents for Huawei AirNode eAN3810A

  • Page 1 V100R001C00 Deployment Guide Issue Date 2017-04-30 HUAWEI TECHNOLOGIES CO., LTD.
  • Page 2 Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...

  • Page 3: About This Chapter

    Unless otherwise stated, "eNodeB", "Pico", "eAN", and "AirNode" in this document refer to the 3810 series AirNode. The 3810 series AirNode is a base station that provides communications services in Huawei OneAir solution. The following table lists the product name and product version related to the 3810 series AirNode.
  • Page 4 Site deployment applies to outdoor coverage scenarios where operator-provided private transport networks are used. Scope Figure 1-1 shows the procedures for site deployment in this document. Figure 1-1 Site deployment in this document Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 5 This section describes the eAN3810A site deployment process. Site deployment requires cooperation of engineers at sites and the OMC, who must master the deployment process shown in Figure 1 in advance of the deployment. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 6: Deployment Preparation

    This section describes the data configuration process. Before configuring data, you are advised to learn the initial base station configuration process on the CME. Figure 1-3 shows the data configuration process. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 7 MOs and parameters in the customizing a summary data deployed, and their planned summary data file by file data differs greatly from specifying MOCs in the data of existing base Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 8 CME, choose Advanced > Customize Summary Data File (CME client mode) or CME > Advanced > Customize Summary Data File (U2000 client mode) on the menu bar. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 9 Start the CME. − Start CME functions on the U2000 client in application mode. On the Windows desktop, choose Start > All Programs > iManager U2000 MBB Client. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 10 On the Windows desktop, choose Start > All Programs > iManager U2000 MBB Client. − Start CME functions on the U2000 client in traditional mode. On the Windows desktop, choose Start > All Programs > iManager U2000 MBB Client. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 11 Create Base Station (U2000 client mode) or OneAir Application > Create Base Station (CME client mode). A dialog box is displayed for you to create base stations. Set site information. Select eAN3810A from the Product type drop-down list. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 12 In area 1, select or search the MO to be configured based on the planned data and double-click the MO. On the displayed page as shown in area 2, set parameters as required, and click to save the parameter configuration. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 13: Verifying Data

    Select the base stations whose auto-deployment data you want to export, and click Next. Select a save path for the exported file and a method for processing data, and click Next. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 14: Preparing An Sd Card

    The data copy rights have been obtained for the computer used to make the SD card.  Prerequisites Item Description The SD card must be the one delivered with Huawei SD card eAN3810A. USB making and The tool is saved in U2000 installation...
  • Page 15 Choose Make USB(M) > Enterprise Private Network Product (for AirNode Only). The Enterprise Private Network Product (for AirNode Only) dialog box is displayed, as shown in Figure 1-6. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 16 Option Information to Set Directory for upgrading  Software path: mandatory, save path of the files Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 17 SD card. After all NE information is correctly specified, select a deployment mode in the USB Flash Drive Type area. Option Description Save the information about each NE to an One USB for One Site independent SD card. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 18 NEs to a specified directory. The software package is shared by all NEs and the data configuration files are distinguished by directories named after ESN. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 19 − One USB for Multiple Sites: Choose Computer > DataCenter(D:) > SD. Copy the MBTS folder from the SD folder to the SD card. See Figure 1-8. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 20 Otherwise, deployment will fail. You are advised to compress the required files into a .rar or .zip file for file transfer. Figure 1-7 File copy procedure in One USB for One Site mode Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 21: Check Methods

    This section describes how to check the SD card port status with MML commands. Prerequisites  The transmission network is ready.  The eAN3710A is connected to the U2000 or Web LMT. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 22 MicroSD card. If inconsistent, it loads the software and configuration file on the MicroSD card. Note the following points about loading:  If the MicroSD card only stores software, the Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 23 Check the RUN indicator for hardware faults on the MicroSD card. The RUN indicator blinks orange (on for 0.125s and off for 0.125s), if the eAN3810A fails to Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 24 Check the status of indicators on a newly deployed eAN3810A. The following table shows the indicator status if an eAN3810A is deployed successfully and working properly. See Table 1-5 Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 25 Center and then choose Topology > Main Topology (application style). On the displayed Main Topology window, check whether the eAN3810A topology is created. See the following Figure 1-9. Figure 1-9 Main topology view Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 26: Handling Alarms

    Fault Management in Application Center and then choose Browse Alarms > Browse Current Alarms (application style). On the displayed Browse Current Alarm window, click Filter. The Filter dialog box is displayed. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 27 Click the Alarm Source tab and click the Custom option button. Then, click Add and choose NE from the shortcut menu. The NE dialog box is displayed. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 28 NEs to the Selected Objects area on the right. Then, click OK. In the Filter dialog box, click OK. All alarms reported by the selected NEs are displayed on the Browse Current Alarm window. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 29 Switching between styles changes the overall usability of the U2000 client and the way the U2000 client is launched. The U2000 client supports two display styles:  Application style  Traditional style Table 1-6describes the differences between the two styles. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 30 On the U2000, choose System Preferences(traditional style) or File Preferences(application style) from the main menu. In the Preferences dialog box, click Client Display Style Client Display Style. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 31 Save Path in the Mode Obtain MicroSD Card  Local Configuration It specifies MBTS\DeployCfg. deployment by file MicroSD a MicroSD card deployment card making mode and target protection version. tool Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 32  MBTS\HotPatch from \hot patch http://suppo version rt.huawei.co NOTE m/enterprise When a MicroSD card stores hot patches of different versions, the save paths are named by Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 33 You have scanned the MicroSD card for viruses by using antivirus tools before applying protection. This can prevent files on the computer from infections.  Files to be protected are ready. Context  Integrity protection Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 34 Choose Start > Programs > iManager U2000 MBB Client > USB Making and Protection Tool to start the tool. Choose USB Protection > USB Protection Settings. The USB Protection Settings dialog box is displayed. See Figure 1-13 Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 35 1 eAN3810A Deployment Guide Figure 1-13 USB Protection Settings Choose One USB Settings > Set Security Policies. The Set Security Policies dialog box is displayed.See Figure 1-14 Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 36 USB Path area after the setting succeeds.In the example shown in the following figure, the path must be set to D:\USBencrypt\NodeB, D:\USBencrypt\eNodeB, or D:\USBencrypt\MBTS. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 37  Integrity protection must be applied to other files. Encryption can be applied to them based on customers' security requirements. Click Execute Protect Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 38 MBTS folder when you perform step 4.1 you must copy the USBConf.xml file to the fixed path in the MicroSD card, in accordance with the following table. Otherwise, the files in the MicroSD card cannot be downloaded. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 39 Choose StartProgramsiManager U2000 MBB ClientUSB Making and Protection Tool to start the tool. Choose USB ProtectionUSB Protection Settings. The USB Protection Settings dialog box is displayed. See the followingFigure 1-17. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 40 Figure 1-17 USB Protection Settings dialog box Choose Multi USB Settings > Set USB Path and Security Policies. The Multi USB Protection Settings dialog box is displayed. See the following Figure 1-18. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 41 Select the IsEncrypted:Index check box: In the file list area, if IsEncrypted:Index is selected for a file, the system applies encryption protection to this file. Otherwise, the system applies only integrity protection to the file. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 42 10. Delete source files on the SD cards. Copy the folder on the PC containing the files that have been protected by using the tool to the SD cards. Note that all the files in this folder must be copied. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 43 Step 3 You can also save all the records by clicking the Save All button on the lower part of the Alarm/Event tab page. You can click one record and drag the mouse to select multiple alarms/events. ----End Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 44 MicroSD card to the eAN3810A to load software and the configuration file. Prerequisites  The SD card has been prepared.  The eAN3810A is working correctly. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 45 Ensure that the eAN3810A hardware has been installed and has passed the installation check. For details about how to perform the hardware installation check, see section "Checking Hardware Installation" in eAN3810A Installation Guide. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 46 Remove the MicroSD card only after you have confirmed that the loading succeeds. Follow-up Procedure If the software version is incorrect after the loading process is completed, perform the following operations: Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 47: Checking Hardware Installation

    The cable layout facilitates maintenance and expansion. Correct and clear labels are attached to both ends of the signal cables. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 48 After you unpack a eAN3810A, you must power on it within 24 hours. If you power off the eAN3810A for maintenance, you must restore power to it within 24 hours. Figure 1-22 shows the eAN3810A power-on check procedure. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 49 1-2 seconds, which does not affect services. 1.3.3 Deployment Preparation This section describes the data and files to be prepared for eAN3810A deployment. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 50 Table 1-14 Parameter preparation Categor Related Command Parameter Value Sample Description Name eNodeB IP Address 193.168.100.59 Used for IPINTERFACE connection to the S1 interface. Used for IP Address 172.253.254.59 Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 51 Frequency band Paramete frequency band in which the cell operates. Uplink CELL_BW_N1 bandwidth 00(20M) Downlink CELL_BW_N1 bandwidth 00(20M) Cell FDD TDD CELL_TDD Indicates the duplex mode of Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 52 Run the ADD SCTPPEER command to add an SCTP peer. Set the Peer IPv4 Address parameter to S1-C interface IP. Run the ADD USERPLANEPEER command to add a user-plane peer. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 53 Step 9 Change the eNodeB ID according to the plan and restart the eNodeB. Run the MOD ENODEBFUNCTION command to modify an eNodeB function. Run the RST BTSNODE command to restart the eNodeB. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 54 //Adding mapping relations required by the S1 interface ADD LOGICALPORT2TRPDEV:TRANSPORTDEVICENO=0,REFNO=0; ADD SCTPHOST2TRPDEV:TRANSPORTDEVICENO=0,REFNO=0; ADD SCTPPEER2TRPDEV:TRANSPORTDEVICENO=0,REFNO=0; ADD UPHOST2TRPDEV:TRANSPORTDEVICENO=0,REFNO=0; ADD UPPEER2TRPDEV:TRANSPORTDEVICENO=0,REFNO=0; //Adding operators and TAs CNOPERATOR:CNOPERATORID=0,CNOPERATORNAME="CMCC",CNOPERATORTYPE=CNOPERATOR_PRIMARY, MCC="460",MNC="90"; ADD CNOPERATORTA:TRACKINGAREAID=0,CNOPERATORID=0,TAC=1; //Adding an S1 object S1:S1ID=0,CNOPERATORID=0,TRANSPORTDEVICECFGFLAG=CP_UP_CFG,CPTRANSPORTDEVICENO=0,UP Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 55 See Table 1-15 Table 1-15 Indicator status of a functional eAN3810A Indicator Status Steady white Slow blinking white (on for 1s and off for LINK Steady white Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 56 Proceed to the next step. Handling Alarms This section describes how to handle alarms generated by a newly deployed eAN3810A. All active alarms must be cleared during the commissioning. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 57 Click the Alarm Source tab and click the Custom option button. Then, click Add and choose NE from the shortcut menu. The NE dialog box is displayed. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 58 NEs to the Selected Objects area on the right. Then, click OK. In the Filter dialog box, click OK. All alarms reported by the selected NEs are displayed on the Browse Current Alarm window. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 59: Verifying Services

    Prerequisites Cells are activated. UEs have been defined on the core network. Procedure Check whether UEs can successfully attach to the eAN3810A and perform ping services. Issue 01 (2017-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.