Table of Contents
Advertisement
TCD300E(e).book Page 38 Tuesday, October 12, 2004 8:22 PM
SMS (Short Message Service)
9
Enter a 4-digit password for the mailbox,
then press , 2 times.
10
Press {ih}.
Note:
L To receive SMS messages using a
mailbox, inform others of your mailbox
number.
Changing private mailbox
settings
You can change the password or name of
the private mailbox and erase the mailbox.
1
Press $ (middle soft key).
2
Select X, then press ,.
3
Select "Public", then press ,.
4
Select "Settings", then press ,.
5
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page
29).
6
Select "Private Mailbox", then
press ,.
7
Select the desired mailbox name, then
press , 2 times.
8
Enter the mailbox's 4-digit password.
9
Edit the mailbox name (5 characters
max., page 39), then press ,.
L To erase the mailbox, press and hold
{C/T}, press ,, select "Yes",
press ,, then press {ih} to
finish.
10
Enter a 4-digit password for the mailbox,
then press , 2 times.
11
Press {ih}.
Note:
L If you change the name of a mailbox
which has messages in the receive list,
the messages will remain in the receive
list under the new mailbox name.
L If you erase a mailbox, its messages will
also be erased.
38
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Storing the PBX line access
number (for PBX users only)
Store your PBX line access number (4 digits
max.) so that SMS messages are sent
properly. When sending SMS messages to
entries in the phonebook or redial list, the
PBX line access number will be deleted.
1
Press $ (middle soft key).
2
Select X, then press ,.
3
Select "Public", then press ,.
4
Select "Settings", then press ,.
5
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page
29).
6
Select "PBX Access No.", then press
,.
7
Select "On", then press ,.
8
Enter your PBX line access code and a
dialling pause, if necessary, then press
, 2 times.
9
Press {ih}.
Advertisement
Table of Contents
