Simple Setup; Television, Antenna And Ac Mains Lead Connections - Panasonic SC-VK480 Operating Instructions Manual

Simple setup

Television, antenna and AC mains lead connections

Connect the AC mains lead after all other connections are complete.
Conserving power
The unit consumes power (approx. 0.4 W) even when it is turned off with [^] (main unit: [8]). To save power when the unit is not to
be used for a long time, unplug it from the household AC power socket. You will need to reset some memory items after plugging in
the unit.
AC mains lead
To household
mains socket
10
Speaker connections
Insert the connector fully.
Before connecting the AC mains lead, set the
voltage.
Voltage Selector
Use a flat-head screwdriver to set the voltage selector
on the back of the main unit to the appropriate position
for the area in which this system is used.
Insertion of Connector
Even when the connector is perfectly inserted,
depending on the type of inlet used, the front part of
the connector may jut out as shown in the drawing.
However there is no problem using the unit.
Note
• The included AC mains lead is for use with this unit
only. Do not use it with other equipment.
• Do not use an AC mains lead from other equipment.
FM indoor antenna
Tape the antenna where reception is best.
Adhesive
tape
Connector
Appliance inlet
Approx. 3.5 mm
Please refer to "Using
an external unit" on
page 32 for more
information on AUX
connection.
Please refer to "Home
Theater—Enjoying
more powerful sound"
on page 32 for
more information on
COAXIAL connection.