Preparation
•
Turn the unit on and set the clock ( Setting the time,
page 13).
•
For the play timer, prepare the desired music source
(cassette, CD, radio, external or USB) and set the volume.
•
For the record timer, check the cassette's erasure
prevention tabs ( Erasure prevention, page 25) and
insert the tape in the deck ( Cassette tapes — Play and
Recording, page 24) or plug in the USB ( USB — Play and
Recording, page 26). Tune to the radio station ( The radio,
page 24) or select the external source ( Using the Music
Port, page 31 and Using an external unit, page 32).
1
Press [CLOCK/TIMER] to select the timer function.
Every time you press the button:
CLOCK
zPLAY
Original display
zPLAY: to set the play timer
zREC: to set the record timer
2
(Within 7 seconds or so)
"ON" time
Press [u, 2/REW] or [i, 1/FF] to make the setting.
Press [CLOCK/TIMER] to confirm.
"OFF" time
Repeat step and to make the setting.
3
Press and hold [z, –PLAY/REC] to display the timer
indicator.
zPLAY: to turn the play timer on
zREC: to turn the record timer on
(The indicator does not appear if the "ON" and "OFF" times
or the clock have not been set.)
4
Press [^] to turn the unit off. The unit must be off for the
timers to operate.
To change the settings
Do steps 1, 2 and 4. ( above)
30
zREC