Changing System Settings - Panasonic SC-VKX60 Operating Instructions Manual

Changing system settings

1
Press [ 4 , DVD/CD].
2
Press [SETUP] to show the SETUP menu.
3
Press [ R / T ] to select the menu and press [OK].
To go back to the previous menu, press [ , RETURN].
4
Press [ R / T ] to select an item and press [OK].
"DISC" menu
CURRENT SETTINGS
AUDIO
Change the audio language.
SUBTITLE
Change the subtitle language.
MENUS
Change the language for disc menus.
RATINGS
Set a ratings level to limit DVD-Video
playback.
PASSWORD
Change the password for "RATINGS"
( Z above).
1 The original language designated on the disc is selected.
Input the applicable code from the "Language code list" ( Z 23).
2
3 If the language selection for "AUDIO" is not available for the disc played, the subtitles in that language will be shown (if available on the disc).
"VIDEO" menu
CURRENT SETTINGS
TV ASPECT
Change the setting to suit your TV and
preference.
TIME DELAY
When connected with an AV amplifier
and Plasma TV, adjust if the audio is
out of sync with the video.
NTSC DISC OUT
Change PAL60 or NTSC output when
you play NTSC discs.
STILL MODE
Specify the type of picture shown
when in pause mode.
VIDEO OUT (I/P)
Select "PROGRESSIVE" only if
connecting to a progressive output
compatible TV.
20
20
EASY SETUP allows successive settings of the items in the shaded area.
Show the current setting of the items in this menu.
ENGLISH FRENCH
HUNGARIAN CZECH
AUTO 3 ENGLISH
RUSSIAN HUNGARIAN
ENGLISH FRENCH
HUNGARIAN CZECH
Setting ratings
0 LOCK ALL: To prevent playback of discs without ratings levels.
1 to 7: To prevent playback of DVD-Video with the same ratings recorded on them.
8 NO LIMIT
When you set the ratings level, a password screen is shown.
Follow the on-screen instructions.
Do not forget your password.
A message screen is shown if a DVD-Video with higher ratings level is played.
Follow the on-screen instructions.
1. Select "CHANGE" and press [OK].
2. Input the current password with the numeric buttons, then press [OK].
3. Input the new password with the numeric buttons, then press [OK].
If "VERIFY" is shown, make sure that the new password is correct and input it again.
Show the current setting of the items in this menu.
16:9: Widescreen TV (16:9)
4:3PAN&SCAN: Regular aspect TV (4:3)
The sides of the widescreen picture are cut off so it fills the screen (unless
prohibited by the disc).
4:3LETTERBOX: Regular aspect TV (4:3)
Widescreen picture is shown in the letterbox style.
0 ms
60 ms
NTSC: Output signals from NTSC discs remains as NTSC.
PAL60: NTSC discs can be viewed on PAL TV.
AUTO
FIELD: The picture is not blurred, but the picture quality is lowered.
FRAME: Overall quality is high, but the picture is blurred.
INTERLACE
PROGRESSIVE
When you select "PROGRESSIVE", a message screen will appear.
For progressive output, press [ R ] and then press [OK].
To cancel, press [ , RETURN].
5
Press [ R / T ] to make the setting and press [OK].
6
Press [SETUP] to close the screen.
• The settings stay intact even if you put the system on standby
mode.
• Underlined items are the factory settings in the menu.
SPANISH GERMAN
POLISH ORIGINAL
FRENCH SPANISH
CZECH POLISH
SPANISH GERMAN
POLISH OTHER ----
20 ms
80 ms
RUSSIAN
1 OTHER ---- 2
GERMAN
OTHER ----
2
RUSSIAN
2
40 ms
100 ms