Panasonic SC-VKX60 Operating Instructions Manual page 25

General operation
You have forgotten your ratings
password.
Other equipment operates with the
supplied remote control.
Disc operation
Playback starts slowly.
Playback does not start.
Groups deeper than the eighth
layer on a data disc are not shown
correctly.
A menu screen shows during skip
or search.
Playback control menu does not
show.
The program and random playback
functions do not work.
Programmed items are not played.
No subtitles.
Cannot select alternative
languages.
Point B is automatically set.
The SETUP menu cannot be
accessed.
Sound
No sound.
Sound is distorted.
Humming heard during playback.
Picture
Picture is distorted.
No picture.
A defective TV display or faded
colours.
Picture stops.
Menus not shown correctly.
• Reset all the settings to factory preset.
1. Press [ 4 , DVD/CD] and then press [ 8 ].
2. Press [ 8 ] on the main unit and [ 10] on the remote control at the same time.
"INIT" shows on the display panel.
• Change the remote control mode.
• Playback starts slowly when an MP3 content has still picture data. Even after the content
starts, the correct play time will not be shown.
• This is usual on DivX video.
• Playback of MPEG4 that contains still picture data is not possible.
• If a disc contains CD-DA and other formats, correct playback is not possible.
• If playing DivX VOD content, refer to the website where you purchased it.
(Example: www.divx.com/vod)
• Groups deeper than the eighth layer are shown as the eighth layer.
• This is usual for Video CDs.
with playback control (PBC).
• Press [ 8 ] two times and then press [ 4 , DVD/CD].
• These functions do not work with some DVD-Videos.
• Some items cannot be played even if you have programmed them.
• Show the subtitles ("SUBTITLE" in Menu 1).
• It is possible that the subtitles are not shown because of the disc.
• Select from the menu of the disc if one is available.
• The end of an item becomes point B when it is at the end.
• Select "DVD/CD" as the source.
• Cancel the program and random playback.
• Examine the connections.
• Increase the volume.
• There is possibly a pause in the sound when you change the play speed.
• Audio is possibly not output because of how the contents are made.
• Noise can occur when playing WMA.
• An AC mains lead or a fluorescent light is near the cables. Keep other appliances and
cords away from the cables of this system.
• It is common to experience some distortion during "SEARCH".
• Make sure that the system is connected directly to the TV, and is not connected through
a VCR.
• Change the "SOURCE SELECT" in Menu 2.
• Examine the connection.
• Make sure that the video input mode of the TV is correct.
• The system and TV are using different video systems.
– Use the multi-system or NTSC TV.
• The system used on the disc does not complement your TV.
– Videos on PAL discs cannot be correctly shown on an NTSC TV.
– This system can convert NTSC signals to PAL 60 to be shown on a PAL TV
("NTSC DISC OUT" in "VIDEO" menu).
• Picture can stop if the DivX contents are more than 2 GB.
• Change the zoom ratio to "NORMAL" in "ZOOM" in Menu 2.
• Change the "TV ASPECT" in "VIDEO" menu.
Page
–
21
Page
–
–
–
–
23
22
–
–
–
–
13
–
–
13
10
11
Page
6
8
13
–
–
–
Page
11
6
13
6
–
–
20
–
13
20
25
25