Making The Connections - Panasonic SC-VKX60 Operating Instructions Manual

Making the connections

Connect the AC mains lead only after all the other connections have been made.
Conserving power
The system consumes approximately 0.3 W when it is in standby mode. Disconnect the power supply if you do not use the system.
Some settings will be lost after you disconnect the system. You have to set them again.
Connect the TV
VIDEO OUT terminal
COMPONENT VIDEO OUT terminals
Component video cables
(not included)
Use these terminals for interlace or progressive output.
To enjoy progressive video
1. Connect to a progressive output compatible TV.
2. Set "VIDEO OUT (I/P)" to "PROGRESSIVE"
( Z 20, "VIDEO" menu).
Do not make the video connections through the VCR
The video cannot show correctly because of copy-guard
protection.
Connect the speakers
6
6
Video cable
TV
(included)
(not included)
TV
(not included)
Connect the FM indoor antenna
Put the antenna where reception is best.
Adhesive tape
Refer to "Using the
auxiliary input" ( Z 19) for
more information on AUX
connection.
Refer to "Using the digital output"
( Z 19) for more information on
COAXIAL connection.