Table of Contents
Advertisement
PCH DMI ASPM [Enabled]
Allows you to configure the PCH DMI ASPM.
Configuration options: [Disabled] [Enabled]
PCI Express Root Port 1 to Port 8
Allows you to configure the PCI Express Root port settings.
PCIE ASMP [Disable ASPM]
Allows you to configure the PCH DMI ASPM.
Configuration options: [Disable ASPM] [ASPM L0s] [ASPM L1] [ASPM
L0sL1] [ASPM Auto]
PCH sSATA Configuration
sSATA Controller [Enabled]
Allows you to enable or disable the sSATA Controller.
Configuration options: [Disabled] [Enabled]
Configure sSATA as [AHCI]
Allows you to identify the SATA port is connected to Solid State Drive or Hard Disk Drive.
Configuration options: [IDE] [AHCI] [RAID]
SATA Mode options
SATA LED locate [Enabled]
If enabled, LED/SGPIO hardware is attached.
Configuration options: [Disabled] [Enabled]
Support Aggressive Link Power Management [Enabled]
Allows you to enable or disable the Support Aggressive Link Power (SALP) Management.
Configuration options: [Disabled] [Enabled]
ASUS RS520-E8-RS8 V2, RS520-E8-RS12-EV2
5-35
Advertisement
Table of Contents
