Table of Contents
Advertisement
6.
RAID configuration utility selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility to use when you create
disk arrays. Place the jumper caps over pins 1–2 to use the third party software LSI
MegaRAID software RAID Configuration Utility; otherwise, place the jumper caps to
pins 2–3 to use the Intel
Utility.
7.
BMC Setting (3-pin BMC_EN1)
This jumper allows you to enable or disable the Baseboard Management Controller
(ASMB8).
ASUS RS520-E8-RS8 V2, RS520-E8-RS12-EV2
®
Rapid Storage Technology enterprise SATA Option ROM
4-7
Advertisement
Table of Contents
