Vga Controller Setting (3-Pin Vga_Sw1); Lan Controller Setting (3-Pin Lan_Sw1, Lan_Sw2) - Asus RS520-E8-RS8 V2 User Manual

2.

VGA controller setting (3-pin VGA_SW1)

This jumper allows you to enable or disable the onboard VGA controller. Set to pins
1–2 to activate the VGA feature.
3.

LAN controller setting (3-pin LAN_SW1, LAN_SW2)

These jumpers allow you to enable or disable the onboard LAN_SW1 or LAN_SW2.
Set to pins 1–2 to activate the Gigabit LAN feature.
ASUS RS520-E8-RS8 V2, RS520-E8-RS12-EV2 4-5