Table of Contents
Advertisement
14.
Chassis Intrusion (2-pin INTRUSION1)
These leads are for the intrusion detection feature for chassis with intrusion sensor or
microswitch. When you remove any chassis component, the sensor triggers and sends
a high level signal to these leads to record a chassis intrusion event. The default setting
is short CASEOPEN and GND pin by jumper cap to disable the function.
15.
ISATA & ISSATA connectors (ISATA; ISSATA)
The ISATA connector (AHCI) supports 4 SATA 6Gb/s ports and Intel RAID/LSI
MegaRAID.
The ISSATA connector (AHCI) supports 4 SATA 6Gb/s ports and Intel RAID.
4-16
Chapter 4: Motherboard Information
Advertisement
Table of Contents
