Panasonic KX-TVS50 Installation Manual page 242

SYSTEM ADMINISTRATOR'S GUIDE
Parameter
Beeper
Callback
No. Entry
Mode
MWL
Notification for
Unreceived
Message
Device
Notification for
Unreceived
Message
Authorization
for External
Message
Delivery
242
Table 40
Value Range
(Default)
1. Caller Select Permits subscribers to use the Callback Number Entry
2. Without feature.
3. Before
4. After
Caller
5. Disable
Select:
(Disable)
Without:
Before:
After:
Disable:
Note: To utilize this feature, the callback number entry
code must be included in the subscriber's beeper number.
When "Disable" is selected or if the caller does not enter
a callback number, "System Callback No." (see Table
63) will be displayed on the beeper's display. If a caller's
number is received through a telephone company's
Caller ID service, the caller's number will be displayed
instead of "System Callback No.".
1. Yes If set to "Yes", the message waiting lamp will illuminate
2. No when unplayed messages remain after the subscriber has
(Yes) accessed the mailbox for Subscriber Service.
1. Yes If set to "Yes", the VPS calls the appropriate device in
2. No numerical order until all unplayed messages are
(No) received.
1. Yes If set to "Yes", subscribers are able to utilize the External
2. No Message Delivery feature. The sub-parameter to be set is
(No) Prompt Mode. If set to "No", sub-parameter cannot be
assigned.
Description/Function
After recording a message, the caller is
asked if the message is urgent. If urgent, the
caller is asked to enter the callback number.
Without recording a message, the caller is
asked to enter the callback number.
Before recording a message, the VPS asks
the caller to enter the callback number.
After recording a message, the VPS asks
the caller to enter the callback number.
Disables the Callback Number Entry
feature.
Installation Manual