Panasonic KX-TVS50 Installation Manual page 280

SYSTEM ADMINISTRATOR'S GUIDE
Parameter
Numbering
Plan
1-16
280
Value Range
(Default)
2-5 digits Specifies the first 1 or 2 digits of the PBX extension
consisting numbers. You can add up to 16 entries to the list. Each entry
of 0-9, X can contain 2-5 digits "0-9", and a letter "X" which matches
(Numbering any digit. Extension numbers cannot begin with "0".
Plan
1:1 XX;
Examples:
Numbering Plan
a) If valid PBX extension numbers are to be specified 101
2-16: None)
through 164 and 201 through 264, specify the numbers
as follows:
1XX: Indicates any 3-digit extension number starting
2XX: Indicates any 3-digit extension number starting
b) If valid PBX extension numbers are to be specified 400
through 450 and 3300 through 3399, specify the
numbers as follows:
4XX: Indicates any 3-digit extension number starting
33XX: Indicates any 4-digit extension starting with
Note:
Auto Configuration will set this parameter automatically.
The Automated Attendant will dial any 2-5 digit PBX
extension number (except numbers beginning with "0")
whether valid or not. If the dialed number is included in the
numbering plan, the Automated Attendant will
immediately send it to the PBX without waiting for further
input. If not, the Automated Attendant will wait until the
dialed number is recognized as an extension number, the
internal inter-digit timer expires, or the caller dials 5 digits.
If the number for an outgoing call is not found on the
Numbering Plan, the VPS will consider it an outside
number. The VPS will then attempt to dial it using the
"Outgoing Call Setup Sequence".
Table 61
Description/Function
with "1".
with "2".
with "4".
"33".
Installation Manual