Middle Housing Removal - Epson Stylus PHOTO RX600 Service Manual

EPSON Stylus PHOTO RX600/610, RX620/630

4.2.3 Middle Housing Removal

1. Scanner Unit Removal. (p42)
2. Remove all connectors from the main board.
3. Remove one screw that secures a tube cover, and remove it from the printer unit.
4. Remove four screws that secure the lower housing to the middle housing.
5. Remove the middle housing upwards.
Pay attention to the guide plate when removing the middle housing.
C H E C K
P O I N T
Disassembly and Assembly
C.B.P Tite 3x10,F/ZN
Tightening torque:0.6 ± 0.1 N
Guide Plate
Main Unit Removal
⋅
m
Middle Housing
Figure 4-3. Middle Housing Removal
Revision C
C.B.P Tite 3X8,F/ZN
Tightening torque
⋅
:0.6 ± 0.1 N m
Tube Cover
43