Lubrication Points Of The Printer - Epson Stylus PHOTO RX600 Service Manual

EPSON Stylus PHOTO RX600/610, RX620/630

6.3.3 Lubrication Points of the Printer

The types and amount of the oils and grease for lubrication of the Printer are
determined based on factory evaluation. Therefore, be sure to apply a specified volume
of the designated grease to each designated point for repair and maintenance of the
Printer. The designated grease and application points are indicated below.
Never use any oil or grease other than designated, since any
C A U T I O N
other oil or grease can badly affect the machine life or function
of the product or damage the mechanism.
As the volume of application is also designated based on
evaluation result, be sure to apply the designated volume of
grease properly.
Front Frame
Table 6-3. Designated Lubrication Points
Assy to be Lubricated Lubrication Points /
(Reference Page) Amount of Application
Lubrication Points
Front of front frame
Grease to be applied
Front Frame
G-58
(p58)
Amount of Application
φ1mm
Length:Up to 35mm ~ 20mm right
ASF Unit
Table 6-4. Designated Lubrication Points
Assy to be Lubricated Lubrication Points /
(Reference Page)) Amount of Application
Lubrication Points
Paper return cam center area
Paper return lever Grease to be applied
(p55)
G-26
Amount of Application
φ1 x 1mm
Maintenance
35mm
Precautions
(Fig No.)
Use an injector to apply
grease.
(See Figure 6-3)
Precautions
(Fig No.)
Use an injector to apply
grease.
(See Figure 6-4)
Lubrication
G-58
Front Frame
Figure 6-3. Lubricating Points (Front Frame)
G-58
Paper return lever
Figure 6-4. Lubricating Points (Paper return lever)
Revision C
20mm
ASF Unit
83