Solid-State Drive (M.2) - HP ZBook Studio G4 Maintenance And Service Manual

Solid-state drive (M.2)

Description
Z Turbo drives, PCIe
1-TB, MLC
512-GB, MLC
512-GB, self-encrypting drive (SED), OPAL 2, TLC
256-GB, TLC
256-GB, MLC
SATA-3 drives:
512-GB, FIPS, TLC
256-GB, SATA-3, self-encrypting drive (SED), OPAL 2
128-GB
Solid-state drive bracket (included in Bracket Kit, spare part number 840966-001)
The system board includes two M.2 solid-state drive connectors. Only use the connector shown by callout (1)
in the following image. Do not use the connector shown by callout (2).
Before removing the solid-state drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
Spare part number
921029-001
921032-001
921033-001
921031-001
921026-001
921028-001
921030-001
921027-001
840966-001 (Bracket Kit)
Component replacement procedures 31