HP ZBook Studio G4 Maintenance And Service Manual page 72

11. If it is necessary to replace the wireless antennas:
a. Remove the cables from the routing path on the bottom-right corner of the display (1).
b. Remove the two Phillips PM2.0×2.0 screws (2) that secure the plastic holder to the bottom of the
display.
c. Peel the antennas off the display (3).
The antennas are available using spare part number 840940-001.
12. If it is necessary to replace the display cable:
a. Remove the display cable and camera cable from the routing path along the bottom and left side of
the display enclosure (1).
60 Chapter 5 Removal and replacement procedures for authorized service provider parts