Speakers - HP ZBook Studio G4 Maintenance And Service Manual

Speakers

Description
Speakers (includes cable)
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the thermal module (see
7. Remove the display cable (see
8. Remove the solid-state drive (see
9. Remove the WLAN module (see
10. Remove the system board (see
Remove the speakers:
1. Remove the four Phillips PM2.0×3.0 broadhead screws (1) that secure the speakers to the computer.
2. Remove the speakers (2).
When reinstalling the speakers, make sure the rubber grommets (3) are properly installed in the screw
housings.
50 Chapter 5 Removal and replacement procedures for authorized service provider parts
Bottom cover on page
Battery on page 41).
Thermal module on page
Display cable on page
Solid-state drive (M.2) on page
WLAN module on page
System board on page
29).
38).
45).
31).
33).
46).
Spare part number
840958-001