Battery - HP ZBook Studio G4 Maintenance And Service Manual

Battery

Description
4-cell, 64-WHr, 4.21-AHr, Li-ion battery
8-cell, 92-WHr, 2.987-AHr, Li-ion battery
Before removing the battery, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
Remove the battery:
WARNING!
computer, a replacement battery provided by HP, or a compatible battery purchased from HP.
CAUTION: Removing a user-replaceable battery that is the sole power source for the computer can cause
loss of information. To prevent loss of information, save your work or shut down the computer through
Windows before removing the battery.
1. Disconnect the battery cable from the system board (1).
2. Remove the six Phillips PM2.5×4.0 screws (2) that secure the battery to the computer.
3. Remove the battery from the computer (3).
Reverse this procedure to install the battery.
Bottom cover on page
To reduce potential safety issues, use only the user-replaceable battery provided with the
29).
Component replacement procedures
Spare part number
808450-002
907584-852
41