Toro 31598 Operator's Manual page 23

1. Tachometer
2. Hydraulic oil temperature
Tachometer
This display shows the engine operating speed in RPM
(Figure 16).
Battery Voltage
This display shows the battery voltage
Hydraulic Oil Temperature Indicator
This display indicates the hydraulic oil temperature
16).
Service Due Indicator
This display indicates the time until the next regular service
interval (Figure 16).
Note: When service has been performed, make sure to reset
the indicator.
Resetting the Service Interval Indicator
1. Press and hold the far right button on the Info Center.
2. The Main Menu screen will come up. Select Service
using the 2 buttons on the left; press the button below
the right arrow to continue.
3. Select Hours and press the button below the right
arrow.
4. Press the button below Reset Hours.
5. Select the Hours for the appropriate next service time
and press the button below the right arrow. A check
mark will appear once it has been reset. When finished,
press the button below the exit icon (picture of a door
Figure 16
3. Battery voltage
4. Service due
(Figure 16).
open) to return to the main screen, or press cancel to
exit.
Engine Air Filter Restriction Indicator
This display
is restricted.
Alarm (InfoCenter)
The InfoCenter's alarm sounds when:
•
an engine fault is received
•
an advisory or fault is received from the TEC controllers
•
starting the machine
(Figure
Info Center
Fault Indicators
Stop If the driver receives a Stop indication, the driver should
cease operation of the machine and the engine as quickly and
as safely as possible to reduce damage to the engine
18).
Check Engine If the driver receives a Check Engine
indication for a maintenance fault, the driver should take the
machine to a service center as soon as possible.
23
(Figure 17) indicates when the engine air filter
Figure 17
g021 157
(Figure