Table of Contents
Advertisement
Problem
The oven does not heat up.
The turnspit does not rotate.
It takes too long to cook the
dishes or they cook too quickly.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Installation
WARNING!
Refer to Safety chapters.
Location of the appliance
You can install your freestanding appliance with
cabinets on one or two sides and in the corner.
Keep a distance of about 1 cm
between the appliance and the back
wall to make sure that the lid opens.
For minimal distances for fitting check the table.
20
Possible cause
The necessary settings are not
set.
The turnspit is not correctly in-
stalled into the turnspit hole.
The temperature is too low or too
high.
We recommend that you write the data here:
Make sure that the settings are
correct.
Refer to "Using the turnspit".
Adjust the temperature if neces-
sary. Follow the advice in the
user manual.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
.........................................
.........................................
.........................................
A
D
Minimum distances
Dimension
A
Remedy
B
C
D
mm
400
www.zanussi.com
Advertisement
Table of Contents
