Zanussi ZCG61236 User Manual page 24

WARNING!
Put the mains plug into the
mains socket only if all parts are
back into their initial position.
There is a risk of injury.
4. Light the burner.
Refer to "Hob - Daily use" chapter.
5. Turn the knob for the hob to the minimum
position.
6. Remove the knob for the hob again.
7. Screw on slowly the bypass screw till the
flame becomes minimum and stable.
8. Put the knob for the hob back on.
Oven injector replacement
1. Remove the bottom plate of the oven cavity
to get access to the oven burner .
2. Carefully remove from the burner the
thermocouple A. Next remove the spark
plug B.
24
3. Unscrew the screw and slowly pull out the
burner.
4. Release the burner injector with a 7 mm
socket spanner and replace it with a right
one.
A
B
1
2
www.zanussi.com