Yamaha Electone STAGEA ELC-02 Owner's Manual page 150

Rhythm Pattern Program
You can also erase all notes of a single instrument, or all
notes entered.
To erase one instrument:
1
Select the key to which the instrument
that you want to erase is assigned.
The key name you have selected and its instrument
name are displayed.
Selected key
2
Press [CLEAR] in the display.
The following display appears, prompting
confirmation of the operation.
3
Select [CLEAR] to erase the selected
instrument.
A bell sound indicates that the instrument has been
erased.
The following method can also be used to erase one
instrument.
1
While holding down the [CLEAR]
button, press the key on the keyboard
corresponding to the instrument you
wish to erase.
A bell sound indicates that the instrument has been
erased.
150 ELC-02/ELCU-M02 Owner's Manual
Instrument name
To erase all instruments:
1
Press [CLEAR] in the display.
The following display appears, prompting
confirmation of the operation.
2
Select [CLEAR ALL] to erase all
instruments.
All instruments are instantly erased.
When you want to replace the instrument you have
already entered with another instrument, it's not
necessary to delete and re-enter. You can quickly replace
the sound with the following procedure.
To replace the instrument:
Before the operation, stop the rhythm.
1
Select the key to which the instrument
you want to replace is assigned.
The key name you have selected and its instrument
name are displayed.
Selected key
2
Simultaneously hold down the
[CHANGE] button in the display and
press the key on the Upper or Lower
keyboard that corresponds to the
instrument you want to use.
The instrument is instantly erased and replaced with
the newly selected one.
Instrument name