JVC CA-MXS6MDR Service Manual page 14

CA-MXS6MDR
SP-MXS6MD
Removing the Loading assembly
Ref: The loading assembly, the traverse mechanism
assembly and the single flame will be
removable after removing the loading assembly
from the body.
Prior to performing the following procedure, remove
the main board, the mechanism cover, the head lifter
and the head assembly.
1. Remove the three screws D on the upper side of the
body.
2. Move the loading assembly forward to disengage it
from the traverse mechanism assembly (Joint d).
Then remove it upward.
3. Remove the traverse mechanism assembly from the
single flame.
1-14
(See Fig.8 and 9)
D D
Joint d
D
Fig.8
Fig.9
Loading assembly
Loading assembly
Traverse mechanism
assembly
Single flame