Look; Move; Number Buttons; Off - Philips basicPalette II Installation And Setup Gude

Stand lighing lighting control consoles

Table of Contents

Installation & Setup Guide

14. Look

• A Look is a location for a stored state that can be accessed as groups, submasters or palettes. Set channels at levels,

then type [RECORD] [LOOK] [1] [ENTER]. This will store the info as Look 1 and it will be accessed as Submas-

ter 1.

• Alternately, you can set them to a level using the keypad by typing [LOOK] # @ Level [ENTER]. Attributes will

always go to their proper recorded level.

• Press [RECORD] or [SHIFT] [RECORD] then a bump button to quickly record a Look to a submaster.

• Groups are stored as Looks, even if the levels are not used.

• Although you can move cues from one Cue List to another while working in one Cue List, moving cues is essen-

tially renumbering cues. Highlight the cues you want to renumber with the blue box, then press [MOVE] [NUM-

BER] [ENTER] to renumber the selected cue(s) to new cue(s).

• While the Move dialogue box is open, you can also select a new numbering scheme.

• Press [MOVE] [LOOK][#] [@] [#] [ENTER] to move Looks.

• Press [SHIFT] [MOVE] [BUMP][BUMP] to quickly move Looks.

• Use [#] [MOVE] [#] [ENTER] to move attributes from one channel to another.

• By default, when typing on an empty command line these buttons will select Channels.

• Use in conjunction with the other keys (+, -, Thru etc.) to select ranges of Channels.

• While in dialogue boxes, these keys fill in numeric fields.

• To change cue times, use these buttons in conjunction with the [ARROW KEYS] and the [EDIT] button to open

the blue box for editing.the blue box for editing.

17. On

• The [ON] button takes the selected channel(s) to the On level as set in Show Options.

• The [OFF] button takes the intensity value to zero for all selected channels.

• Press [PREV] to select the last channel or press [NEXT] to select the next channel.

• When using with dialogue boxes, press [PREV] to go to the previous control or press [NEXT] to go to the next

control.

2 6

Controls

Palette II Lighting Control Console

Table of Contents