Table of Contents
Advertisement
Palette II Lighting Control Console
Installation & Setup Guide
Mouse Options
Clicking the Mouse Options icon opens the Mouse Properties dialogue box. Here you can adjust the way
your mouse works with the console's computer.
Touch Screen Calibration
The console processor supports the use of a touchscreen monitor. Due to mouse driver requirements,
only ELO Touchscreens should be used and connected with the USB cable, not the serial cable. ELO
touchscreens can be purchased from your local Strand Lighting dealer.
The AccuTouch 3000 series models are recommended, since they feature resistive technology (i.e. you
can point with objects other than your finger such as a pen, etc.) Purchase the USB type, NOT the serial
type.
After you have installed a touchscreen monitor, you will need to calibrate the screen. To do this, click the
"Touch Screen Calibration" icon. The ELO Touchscreen Properties dialogue box will allow you to
change various options for touchscreens, most importantly, the calibration. To do this, use the mouse to
touch the "Align" button. The screen should go white and you will be presented with a red target to
touch. Do this with your finger from a typical viewing angle. You will repeat this two more times.
Follow all on-screen prompts to complete the calibration process, then choose "OK" to exit.
4 0
Controls
Advertisement
Table of Contents
