Cab Maintenance; Cleaning The Cab; Cleaning The Cab Air Filters - Toro Groundsmaster 4000 Operator's Manual

Cab Maintenance

Cleaning the Cab

Important:
Use care around the cab seals and
lights (Figure 91). If you are using a pressure
washer, keep the washer wand at least 0.6 m (2 ft)
away from the machine. Do not use the pressure
washer directly on the cab seals and lights or
under the rear overhang.
Figure 91
1. Seal
2. Light

Cleaning the Cab Air Filters

Service Interval: Every 250 hours
1. Remove the screws and grates from both the
in-cab and rear cab air filters
Figure 93).
g034330
3. Keep wand 0.6 m (2 ft)
away.
4. Do not pressure-wash
under the rear overhang.
(Figure 92 and
1. Filter
2. Grate
Rear Cab Air Filter
1. Filter
2. Grate
2. Clean the filters by blowing clean, oil-free,
compressed air through them.
Important:
If either filter has a hole, tear, or
other damage, replace the filter.
3. Install the filters and the grate with the
thumbscrews.
70
Figure 92
In-Cab Air Filter
3. Screw
Figure 93
3. Screw
g028378
g028379