Cab Maintenance; Filling The Washer Fluid Bottle; Cleaning The Cab Air Filters - Toro Groundsmaster 360 Operator's Manual

Cab Maintenance

Filling the Washer Fluid
Bottle
1. Stop the machine on a level surface, stop the
engine, set the parking brake, and remove the
ignition key.
2. Open the hood.
3. Locate the washer fluid bottle
Figure 68
Washer Fluid Bottle with Washer Fluid Symbol
4. Fill the bottle with washer fluid as needed.
5. Close the hood.

Cleaning the Cab Air Filters

Service Interval: Every 250 hours (Replace them if
they are torn or excessively dirty.)
1. Remove the screws and grates from over both
the in-cab and rear cab air filters
(Figure 68).
g028438
(Figure 69).
56
1
Figure 69
1. Filter
2. Grate
1
Figure 70
1. Filter
2. Grate
2. Clean the filters by blowing clean, oil free,
compressed air through them.
Important:
If either filter has a hole, tear, or
other damage, replace it.
3. Install the filters and grate, securing them with
the thumb screws.
2
3
g028378
3. Screw
2
2
3
g028379
3. Screw
g028378
g028379