Hitachi Advanced Server DS220 Hardware Manual page 16

A S
BOUT THE YSTEM
Table 1: System Specifications (Continued)
S
PECIFICATIONS
Front I/O
Rear I/O
TPM
ACPI
Power supply
System rating
Fan
System management
Operating environment
Note:
Internal USB port is reserved for UDK USB drive installation only. Feature hot plug is not available on this
internal USB port.
 Power/ID/Reset Buttons
 Power/ID/Status LEDs
 (2) USB ports
 (1) VGA port (Display Priority: First; one device one time)
 (2) USB 3.0 ports
 (1) VGA port (Display Priority: Second; one device one time)
 (1) RS232 serial port
 (1) GbE RJ45 management port
 (1) ID LED
 (1) MicroSD slot
Yes (optional, SPI mode)
ACPI compliance, S0, S5 support
800W and 1200W Titanium/Platinum redundant PSU, 100-240VAC 50/60Hz,
AC/HVDC support
 100-120/200-240Vac, 50/60Hz, 10/6A or 240Vdc, 5.5A (Per PSU inlet) for
PSU: 1200W
 100-120/200-240Vac, 50/60Hz, 7.4/4A or 240Vdc, 3.7A (Per PSU inlet) for
PSU: 800W & 1200W
(6) dual rotor fans (11+1 redundant)
IPMI v2.0 Compliant, on board "KVM over IP" support
 Operating temperature: 5°C to 40°C (41°F to 104°F)
 Non-operating temperature: -40°C to 70°C (-40°F to 158°F)
 Operating relative humidity: 20% to 85%RH
 Non-operating relative humidity: 10% to 95%RH
D
ESCRIPTION
S F
YSTEM EATURES
4