Lkra-007 Touch Panel Monitor - Sony SRX-R815P Operating Instructions Manual

Digital cinema dual system

Hide thumbs Also See for SRX-R815P:

Safety regulations (20 pages)

Operating instructions manual (44 pages)

Table Of Contents

Table of Contents

a GPIO 1/2 connector (D-sub 25 pin, female)

For connecting to an external device.

For further details, refer to the "Installation

Manual."

b GPIO 3/4 connector (D-sub 15 pin, female)

For connecting to an external device.

For further details, refer to the "Installation

Manual."

c IMB connector

Used to connect to the projector with the supplied PCI

express cable.

d AUDIO CTRL connector (D-sub 9 pin, male)

Used to control audio devices.

e Fan Unit

An exhaust fan.

f Power unit (-)

Connects with the power cord.

g Power unit B mount

For use with separately-sold expansion power units.

With both power units A and B attached, each can be

used as a redundant power source.

To connect a power unit, contact qualified Sony

service personnel.

h SPARE connector (RJ-45 modular jack)

For future expansions.

i DATA connector (RJ-45 modular jack)

Used to connect to a theater network (LAN) and allow

linking and data transfer with other systems.

Be sure to use a CAT6 or above for the LAN cable.

j CTRL connector (RJ-45 modular jack)

Used to connect to a theater network (LAN) and allow

linking and data transfer with other systems.

Be sure to use a CAT6 or above for the LAN cable.

k PRJ connector (RJ-45 modular jack)

Used to connect to the projector's NETWORK

connector with the supplied LAN cable.

l VGA connector (D-sub 15 pin, female)

Used to connect to the touch panel monitor's VGA

connector with the supplied VGA cable.

For connection instructions, refer to the "Installation

Manual."

m TPC connector

Used to connect to the touch panel monitor's TPC

connector with the supplied USB cable.

For connection instructions, refer to the "Installation

Manual."

n UPS connector

Used to connect to an uninterruptible power supply

(UPS).